TSS
Trim, Score, Saw
Pillar TSS with Razorgage
Pillar TSS with Razorgage
Pillar TSS Trim, Score, Saw | Tigerstop Option
Pillar TSS Trim, Score, Saw | Tigerstop Option
Pillar TSS Trim, Score, Saw | Sitting Flat
Pillar TSS Trim, Score, Saw | Sitting Flat
Pillar TSS Trim, Score, Saw | Sitting at Angle
Pillar TSS Trim, Score, Saw | Sitting at Angle
TSS Advantages:
- Tear-out FREE! Absolutely no tear-out on the cut boards
- Very safe operation for the user
- More accurate than a manual chop saw
- Frame is designed to sit flat or tilted at 10 degree angle
- TigerStop ready
TSS (Trim Score Saw) was designed to cut materials that are susceptible to tear out as well as pack cutting of multiple parts at the same time.
Category: Custom Machines
Material Machining Capacities:
Width: Min: N/A”, Max: 12″
Thickness: Min: 1/4″, Max: 2″
Y Axis – Pneumatic cylinder
Y – Axis Guides: High precision Square rail guides & bearings for all
linear motions
Electrical – 3 phase, 208 – 230 volt, 60 cycles, 20 amps
Compressed Air – 90 psi at 10 CFM
Dust collection port – 2 each 4″ port at 696 CFM total
Width – 38″
Depth – 72″
Height – 57″
Weight 1400 lbs. (approximate)
Specifications may be modified. Contact your Pillar Machine Sales Manager for details.
TSS Machine Description
The saw features two counter rotating saws mounted above/below one another. The bottom saw is designed for pre-scoring parts prior to cut off to prevent tear out.
Standard Operation
TSS bottom spindle is designed to accept a 150 mm diameter scoring blade and is powered by a 1-1/2 HP motor. Spindle speed is 4700 RPM. The top spindle is designed for a 300 mm diameter saw blade and is powered by a 3 HP motor. Spindle speed is also 4700 RPM. Saw blade movement is horizontal and utilizes linear bearings and powered by a pneumatic cylinder with adjustable flow controls.
For safety, horizontally mounted pneumatic work clamps are installed on each side of the cut-off saw and are equipped with a proximity switch to release only after full saw blade retraction.
What the TSS Does
The TSS is typically used to perform the following operations:
- Trimming
- Scoring
- Cutting
Pillar Electric Cabinet
TSS PLC
The machine uses a PLC control for simple and easy to use controls. PLC is an acronym for Programmable Logic Controller: an industrial microprocessor-based controller with programmable memory used to store program instructions and various functions.
What Comes with the TSS
Pillar TSS Trim, Score, Saw | Frame Construction
Pillar TSS Trim, Score, Saw | Table
Pillar TSS Trim, Score, Saw | Saw Carriage
Pillar TSS Trim, Score, Saw | Saw Activation
Pillar TSS Trim, Score, Saw | Lower Blade Adjustment
Pillar TSS Trim, Score, Saw | Flow Controls
Pillar TSS Trim, Score, Saw | Part Clamps
Pillar TSS Trim, Score, Saw | Table Sensors
Pillar TSS Trim, Score, Saw | Controls
Pillar TSS Trim, Score, Saw | Guarding
Pillar TSS Saw Blades
Pillar Built To Order Machine
Installation Requirements
Factory installation is not necessary for this machine. It will arrive fully assembled and ready for production once necessary power and air are connected to it.
Phone support for startup is offered on this machine at no charge.
Factory on-site installations are available if preferred. Contact your Pillar Machine representative if interested in obtaining a quote for this option.
Manufactured in Salt Lake City, Utah
Pillar machines are designed, machined, assembled, wired, programmed, and tested at our Salt Lake City facility using U.S. and imported components.
The benefits of buying directly from a U.S. manufacturer include:
- Purchased components are sourced through U.S.-based suppliers.
- Strong parts availability and dependable support.
- Direct factory support from the people who know the machines best.
- When technical assistance is required, you can often speak directly with the people who built, wired, programmed, and tested your machine.
Options for the TSS
Pillar TSS Saw Blades
Option includes one extra upper and one extra lower blade for the machine.
The TSS machine uses a 300 mm diameter saw blade with a 1″ bore for
the top blade.
Upper blade specifications as follows:
Diameter: 300 mm
Tooth count: 96
Bore: 1″
Tooth grind: ATB
Hook angle: 10°
The TSS machine uses a 150 mm diameter conical saw blade with a 30 mm bore for the bottom score blade.
Lower blade specifications as follows:
Diameter: 150 mm
Tooth count: 24
Bore: 30 mm
Tooth grind: ATB
Hook angle: 8°
Grind shape: conical
The machine includes one of each of these blades.
Pillar TSS Trim, Score, Saw | 15 inch Wide Option
This options gives a maximum opening of 15″.
Pillar Foot Pedal Control
This option will convert the machine from a dual palm button start switch to a foot pedal start switch.
Notes:
1. Selecting this option may increase your machines lead time.
Pillar TSS Trim, Score, Saw | Tigerstop Option
This option includes a 8′ TigerStop mounted to the TSS. This TigerStop is a CNC positioned stop or pusher. Included with this option:
One 8′ TigerStop with inf-eed table
One 6′ out-feed table with back fence
Mounting hardware that attaches both infeed and outfeed tables to the TSS
Full integration of TigerStop to TSS controls
Notes:
1. The standard configuration had the servo fence mounted to the right side of the machine. If the left is desired please let your
Pillar Machine regional sales manager know.
2. If this option is desired, please let your Pillar Machine regional sales manager as this option will increase the cost for freight of the machine to your facility.
3. This option is manufactured by TigerStop; the warranty for these items comes from TigerStop. Pillar Machine assumes no
liability for the performance or warranty of these items.
This option includes a 10′ TigerStop mounted to the TSS. This TigerStop is a CNC positioned stop or pusher.
Included with this option:
One 10′ TigerStop with in-feed table
One 6′ out-feed table with back fence
Mounting hardware that attaches both infeed and outfeed tables to the TSS
Full integration of TigerStop to TSS controls
Notes:
1. The standard configuration had the servo fence mounted to the right side of the machine. If the left is desired please let your
Pillar Machine regional sales manager know.
2. If this option is desired, please let your Pillar Machine regional sales manager as this option will increase the cost for freight of the machine to your facility.
3. This option is manufactured by TigerStop; the warranty for these items comes from TigerStop. Pillar Machine assumes no liability for the performance or warranty of these items.
