6000
Series Sander
The 6000 Series machine will brush sand and/or wire brush parts with standard widths from 25 to 73 inches. It has 1 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter. It has a fixed height conveyor and accommodates parts up to 9 inches thick.
REQUEST A QUOTE
HOW TO BUY
DOWNLOAD BROCHURE | DOWNLOAD MACHINE FOOTPRINT
*Line Card Coming Soon
**This footprint is just one of many possible configurations
More Machines Like This
Pillar Machine
Larick, A Pillar Machine Company | 700 Series Profile Sander With Options
Pillar Machine
Pillar Machine | The New & Improved Larick 5000 Series Sander
Operator interface:
Touchscreen control
Conveyor width:
25 inch (37″, 49″, and 61″ options are available. See options section)
Material thickness:
Up to 9″ thick
Feed Rate:
4 to 47 FPM
Dust Collection Ports:
Multiple 6″
Dust Collection CFM:
900+
208-240 Volt, 3 Phase, 50-60 Hertz
Spindle dimensions:
1 1/4″ diameter
Spindle HP:
2 HP (higher HP is available, see option section for more details)
Spindle RPM:
Top head: 200 to 900 RPM
1. Abrasives not included. Ask your sales rep for recommended abrasives to include with this machine.
Length & Weight is dependent on configuration.
Larick 6000 Series Description
The LARICK 6000 Series machine will brush sand and/or wire brush parts with standard widths of 25, 37 and 49 inches. It has 2 to 6 spindles which will accommodate sanding or wire brushes up to 14-inch diameter and 50 inches long. It has a fixed height conveyor and accommodates parts up to 9 inches thick.
- The standard configuration is 2 spindle and 25″ wide conveyer belt.
- The spindles are belt driven with full power down to 450 RPM.
- Speed and direction are controlled from the touchscreen.
- Each motor’s load is also displayed.
Standard Operation
The Larick 6000 Series Machines are offered in various widths, number of brushes, and motor horsepower.
They have individual spindle height adjustments with digital counters for each spindle and for the hold down rollers.
The conveyor is fixed height with belt length adjusters which also adjust the belt tracking.
Each spindle is powered by its own motor, driven by an inverter and controlled from the touchscreen. On the touchscreen, the speed and direction of rotation are selected, both the set and running speeds are displayed as well as the output torque for each motor.
There are stop switches by the touchscreen and on the outfeed end of the machine which will stop all spindles and the conveyor.
A safety gate at the infeed end will also stop everything. Digital counters read the vertical position to 1/1000 inch.
What the 6000 Does
6000 Series Machines are typically used to perform the following operations:
brush or wire sanding
sanding on top and bottom simultaneously
Touchscreen Interface
6000 Series Sander uses a touchscreen to to control speed and direction. Each motor load is also displayed.
What Comes with the Larick 6000
Larick Sanders, a Pillar Machine Company | 6000 Series Sander Infeed
Larick Sanders, a Pillar Machine Company | 6000 Series Sander Outfeed
Larick Sanders, a Pillar Machine Company | 6000 Series Sander Digital Readout Knob
Installation Requirements
Factory installation is not necessary for this machine. It will arrive fully assembled and ready for production once necessary power and air are connected to it.
Phone support for startup is offered on this machine at no charge.
Factory on-site installations are available if preferred. Contact your Pillar Machine representative if interested in obtaining a quote for this option.
Made In The USA
All Larick Machines are built 100% at our Fort Collins, Colorado Factory.
The benefits of purchasing an American made machine extend far beyond simply supporting the “local” economy.
Additional benefits include:
- All parts are sourced from vendors in North America.
- Parts availability is increased and assures honest pricing.
- Real Factory Support.
When technical assistance is required you can often talk directly to the people that built, wired, and tested your machine.
1 Year Warranty
Larick Profile Shaping & Sanding, a Pillar Machine company, warrants to the original purchaser of the Larick Machinery that this product will be free from defects in material or workmanship, when purchased, and under proper, normal use, for one (1) year from the original date of delivery. Original purchaser understands that the machine warranty is only applicable to machines that are or were paid in full within 60 days of the original delivery date.
The full defined warranty can be found here: https://pillarmachine.com/pillar-service/#warranty
Options for the Larick 6000
Shown here is an example of a 6000 machine with 3 heads and 25″ wide footprint.
This picture is for representation purposes only showing the machine with multiple options that are not included as standard features on the 700.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander 37″ Wide Option
This option makes the machine accept parts up to 37″ wide instead of the 25″ as standard.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander 49″ Wide Option
This option makes the machine accept parts up to 48″ wide instead of the 25″ as standard.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander 61″ Wide Option
This option makes the machine accept parts up to 61″ wide instead of the 25″ as standard.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander Extra Spindle Option
This option adds one extra sanding spindle to the 25″ wide 6000 machine.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander Extra Spindle Option
This option adds one extra sanding spindle to the 37″ wide 6000 machine.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander Extra Spindle Option
This option adds one extra sanding spindle to the 49″ wide 6000 machine.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander Extra Spindle Option
This option adds one extra sanding spindle to the 61″ wide 6000 machine.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander 25″ Sanding Head
25″ Sanding Head option includes:
1. One each 180mm Diameter sanding hub (650mm long), 36 strips per head.
2. Sanding hubs are manufactured by Mastersand.
3. Sanding paper is Single-Sided Cora-brand Abrasive inserts and are 45mm in height.
4. Sanding paper strips are manufactured by Mastersand.
5. Sanding paper grit on the on one side is 120 with alternating flap widths of 4mm and 7mm.
6. Sanding paper grit on the on the other side is 180 with alternating flap widths of 4mm and 7mm.
Notes:
1. Other sanding configurations, heights, and grits are available, contact our sales rep for more information.
2. Items pictured is only representative may not represent the exact configuration of this option.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander 37, 49, or 61″ Sanding Head
37″ Sanding Head option includes:
1. One each 180mm Diameter sanding hub (965mm long). 36 strips per head.
2. Sanding hubs are manufactured by Mastersand.
3. Sanding paper is Single-Sided Cora-brand Abrasive inserts and are 45mm in height.
4. Sanding paper strips are manufactured by Mastersand.
5. Sanding paper grit on the on one side is 120 with alternating flap widths of 4mm and 7mm.
6. Sanding paper grit on the on the other side is 180 with alternating flap widths of 4mm and 7mm.
Notes:
1. Other sanding configurations, heights, and grits are available, contact our sales rep for more information.
2. Items pictured is only representative may not represent the exact configuration of this option.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander 37, 49, or 61″ Sanding Head
49″ Sanding Head option includes:
1. One each 180mm Diameter sanding hub (1270mm long). 36 strips per head.
2. Sanding hubs are manufactured by Mastersand.
3. Sanding paper is Single-Sided Cora-brand Abrasive inserts and are 45mm in height.
4. Sanding paper strips are manufactured by Mastersand.
5. Sanding paper grit on the on one side is 120 with alternating flap widths of 4mm and 7mm.
6. Sanding paper grit on the on the other side is 180 with alternating flap widths of 4mm and 7mm.
Notes:
1. Other sanding configurations, heights, and grits are available, contact our sales rep for more information.
2. Items pictured is only representative may not represent the exact configuration of this option.
Larick Sanders, a Pillar Machine Company | 6000 Series Sander 37, 49, or 61″ Sanding Head
61″ Sanding Head option includes:
1. One each 180mm Diameter sanding hub (1570mm long). 36 strips per head.
2. Sanding hubs are manufactured by Mastersand.
3. Sanding paper is Single-Sided Cora-brand Abrasive inserts and are 45mm in height.
4. Sanding paper strips are manufactured by Mastersand.
5. Sanding paper grit on the on one side is 120 with alternating flap widths of 4mm and 7mm.
6. Sanding paper grit on the on the other side is 180 with alternating flap widths of 4mm and 7mm.
Notes:
1. Other sanding configurations, heights, and grits are available, contact our sales rep for more information.
2. Items pictured is only representative may not represent the exact configuration of this option.
Larick, A Pillar Machine Company | 3HP Motor Upgrade
This option upgrades the standard 2 HP motor to a 3 HP
Notes:
1. The price listed for this upgrade is for the upgrading on one motor.
2. Only top heads on the 700 series can be upgraded.
Larick, A Pillar Machine Company | 5HP Motor Upgrade
This option upgrades the standard 2 HP motor to a 5 HP
Notes:
1. The price listed for this upgrade is for the upgrading on one motor.
Larick, A Pillar Machine Company | 6000 Series Sander 7.5HP Motor Upgrade
7.5 HP Spindle option upgrades the standard 2 HP motor to a 7.5 HP
Note: The price listed for this upgrade is for the upgrading on one motor.
Larick 10HP Motor Upgrade
10 HP Spindle option upgrades the standard 2 HP motor to a 10 HP
Note: The price listed for this upgrade is for the upgrading on one motor.
Larick 575 Volt 3 Phase Option
575 volt three phase option is price per spindle.
Larick 460 Volt 3 Phase Option
460 volt three phase option is cost is per spindle.
