M45
Miter Machine: Mortise & Tenon Miter Doors
The M45 is our entry level miter, mortise, and tenon machine. One of our most popular wood cnc machines that features side pressure clamps to ensure the part is firmly against the side fence prior to clamping. This guarantees a perfect 45˚ miter every time. The M45 will produce 150-175 doors per shift.
M45 Advantages:
- Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.
- The ability to cut MDF paper or vinyl wrapped profiles.
- Eliminates the need for applying inlays.
- Reduces the maintenance and cost associated with the tooling by more than 50% by eliminating end coping.
- Eliminates the need for outside profiling or sanding the edges of doors
- Eliminates the need for sanding the face of the doors
- Both stiles and rails are run face down for consistency of machining.
- Self aligning joints
- There is a more durable and aesthetically pleasing blind joint (no visible joint on edge of board)
- Multiple tool paths to choose from in tenon and miter (on the mortise side) to accommodate all profiles.
More Machines Like This
Pillar Machine
Pillar MMTJ Miter Machine - NEW FOR 2024!
Pillar Machine
Pillar MMTX 6-Axis CNC Miter Machine
Freight Options
FREE Online Training
1 Year Warranty
Made in the USA
1.5″ x 3.5″ Wide Machining Capability
4.5″ to Unlimited Length Capability
5/8″ to 1″ thickness capability
X Axis – Servo Ball Screw and Nut
Z Axis – Servo Ball Screw and Nut
Y Axis – Manual DRO Knob
X – Axis Guides: High precision Square rail guides & bearings for all
linear motions
Y – Axis Guides: High precision Square rail guides & bearings for all
linear motions
Z – Axis Guides: High Precision Square rail guides & bearings for all
linear motions
Electrical – 3 phase, 208 – 230 volt, 60 cycles, 18 amps
Compressed Air – 90 psi at 10 CFM
Dust collection port’s – 2 each 4″
Dust collection CFM total – 700 CFM
Width – 68″
Depth – 53″
Height – 72″
Weight 1300 lbs. (approximate)
Note: Machine dimensions subject to change depending on machine
configuration.
M45 Machine Description
The M45 is our entry level miter, mortise, and tenon machine. One of our most popular wood cnc machines that features side pressure clamps to ensure the part is firmly against the side fence prior to clamping. This guarantees a perfect 45˚ miter every time. The M45 will produce 150-175 doors per shift.
Standard Operation
The M45 is our entry level miter, mortise, and tenon machine. One of our most popular wood cnc machines that features side pressure clamps to ensure the part is firmly against the side fence prior to clamping. This guarantees a perfect 45˚ miter every time. The M45 will produce 150-175 doors per shift.
What the M45 Does
The M45 is typically used to perform the following operations:
1. Cuts 45 degree miters on profiled hard wood, soft and/or MDF
2. Cuts tenons right into the wood itself in zone 1.
3. Drills mortise pockets into the part in zone 2.
4. This machine will produce 150-175 miter doors per 8 hour shift.
Touchscreen Interface
A 15″ Industrial Color Touchscreen is used to write and store programs.
The 15″ touch screen monitor makes viewing the specific parameters of a program easy.
Note: Image may not necessarily depict final Operator Interface and is only used as an example of an Operator Interface Screen.
OPERATOR INTERFACE SCREEN
The on-screen graphics of the operator interface have been designed to allow for quick programming at the machine. Typically, programs can be written and recalled in less than one minute. The Interface is open architecture allowing it to integrate with design software that can give hole locations in the form of a .xml file or a bar code (with bar code reader purchase found in options).
Standard Features in the software include:
1. Graphic interface to show size of part (in width and height).
2. Program mortise and tenon size and depth.
3. Adjust number of passes when cutting tenon.
4. Password protection of certain features/functions.
5. Online diagnostic capability (if machine is connected to an internet connection).
6. Toggle between Metric or Imperial programing parameters.
Note: Image may not necessarily depict final Operator Interface and is only used as an example of a Maintenance Screen.
M45 MAINTENANCE SCREEN
A Maintenance Screen gives you the ability to manage inputs, outputs and machine offsets.
From this screen you can manually trigger all outputs as well as visually see if the machine is seeing the inputs correctly. You also set the machine parameters that are not as communally used such as fence and spindle offsets from this screen.
Because this screen is password protected you can be selective with who you grant access to it.
Industrial Computer (Windows 10)
SPECIFICATIONS:
Video: on board
Ethernet 1 x PCIE Broadcom GbE (or similar)
USB: 2 x USB 2.0 (or similar)
Serial Port: 1 x RS-232 (or similar)
100-240 VAC External Power adapter (or similar)
Windows 10 operating system
Note: photo may not represent the exact computer to be used in the machine.
What Comes with the M45
Pillar Machine M45 Frame
Pillar Machine Sizing Fence and Clamps
Pillar Machine M45 Dust Collection
Pillar Machine 3D Model
Installation & Training
One day of installation is included in price of machinery.
Customer Responsibilities:
1. Floor preparation per your needs.
2. All power supply connection per national and local codes and standards.
3. Any necessary pneumatic connections and supply.
4. Moving of the equipment which could require forklift(s), rigging, and labor.
5. Materials and tooling needed for machine testing, training, or adjusting.
Expectations
The machine will ship fully assembled, and nearly functional. Pillar Machine expects the machinery to be in place, and all the necessary utilities to have already been brought to the machine before the technician arrives. The technician will finish preparing the machine to run and instruct any machine operators in how to maintain and operate the machine properly.
Should the machine not be ready at the time of the technician’s arrival, Pillar Machine reserves the right to charge up to $1000 for itinerary changes in the case of a complete cancellation of the installation, Pillar Machine will charge the full $1600 per day rate plus all travel expenses for the return visit.
Training
Training should be attended by all individuals that need to understand how the machine functions including all Management personnel, Team Leaders, Operators and Maintenance personnel. If this machine is going in operation for multiple shifts per day, we suggest having all personal from those shifts attend this training session as well. If this is not possible and they need to be trained from the factory technician, please ask your Pillar Machine sales representative to add an additional day of training.
Details
Notes: One day of technician time is defined no less than 6 hours on-site. The technician will spend the first few hours getting the machine setup correctly and the remaining time training.
If you have purchased a custom machine that has custom tooling you have purchased, make sure to have the tooling onsite and ready for installation, prior to the installer arriving. If we purchased the tooling, it will be on your machine. Have your samples ready for the installer.
The technician has planned the day(s) to install the machine and do any training of the machine as indicated in the contract. Having your appropriate tools and equipment needed to do the install and training will provide you and the technician a smooth install.
Made In The USA
All Pillar Machine Machines are built 100% at our Salt Lake City Factory.
The benefits of purchasing an American made machine extend far beyond simply supporting the “local” economy.
Additional benefits include:
- All parts are sourced from vendors in North America.
- Parts availability is increased and assures honest pricing.
- Real Factory Support.
When technical assistance is required you can often talk directly to the people that built, wired, and tested your machine.
1 Year Warranty
Pillar Machine warrants to the original purchaser of the Pillar Machine Machinery that this product will be free from defects in material or workmanship, when purchased, and under proper, normal use, for one (1) year from the original date of delivery. Original purchaser understands that the machine warranty is only applicable to machines that are or were paid in full within 60 days of the original delivery date.
The full defined warranty can be found here: https://pillarmachine.com/pillar-service/#warranty
Options for the M45
Pillar Machine MMTJ Grooved Tenons
Do you require extra holding power in your door construction? This option upgrades the tooling to put two grooved lines in the edge of the tenon to give anchor points for glue.
Pillar MMTJ Automatic Oiler
This option adds a compressed air automatic oiler to the frequently used bearings on the machine. The oiler uses oiled compressed air to deliver lubrication to the linear bearings. Because of the nature of this option, the bearings operate under positive pressure making them less susceptible to dust contamination.
Pillar Machine Miter Diamond Tool
This option includes the following:
(1) Royce Air Diamond tenon cutter head (2″ diameter).
(1) 3/8″ diameter high speed steel mortise bit.
(1) 3/8″ Collet (ER 25)
(1) 3/4″ Collet (ER 32)
(1) Cover Nut (ER 25)
(1) Cover Nut (ER 32)
(4) Spindle Wrenches
