230
Profile Sander
230 Advantages:
- designed for flexible brushes
- fully adjustable individually, with vertical, horizontal, tilt, and rotation.
The 230 Series Profile Sander is a two spindle machine designed for use with flexible brush type sanding wheels. The spindles adjust individually, with vertical, horizontal, tilt and rotation. It can be placed at the outfeed end of a moulder, over a table, or used to sand free-hand.
Larick Sanders Category
More Machines Like This
Pillar Machine
Larick 360 Profile Sander
Pillar Machine
Larick Sanders, a Pillar Machine Company | 260 Profile Sander
Pillar Machine
Larick Sanders, a Pillar Machine Company | 150 Profile Sander
Motor:
Two each 1 HP 6 Pole 3 phase Direct Drive
Arbor:
1.25″ Dia. by 10″ long
Dust Collection:
Two each 3.0″ ports (400 CFM total)
This Machine comes standard with Casters for easy mobility.
208-240 Volt, 3 Phase, 50-60 Hertz
Variable Speed:
AC Inverter 100-1200 rpm
Vertical Travel:
18″
Footprint:
37.5″ by 32″
Weight:
495 lbs.
Larick 230 Description
The Model 230 Profile Sander is designed for use with flexible brush type sanding wheels. Beyond that, you will find super versatility in this machine, adjusting each spindle vertically and horizontally, with tilt and rotation – at the outfeed, over a table, or sand your wood part freehand!
Standard Operation
The spindle motors are controlled by inverters giving individual variable speed and sanding direction. The spindles on the Larick Model 230 adjust individually to sand the top, bottom, front, or back of parts. Inverters control the spindles’ speed and rotational direction individually.
In addition to the built-in adjustment of the stands, the stands may slide forward/back on the base in addition to mounting the base higher or lower. Locking casters allow it to be rolled into position and locked in place.
What the 230 Does
The 230 is typically used to perform the following operation:
Sanding both sides of part
Manual On/Off Switch
Larick 230 Profile Sander uses a VFD (acronym for Variable Frequency Drive) to control electric motors in machinery. On/off VFD’s control the spindles.
There are also handwheels for vertical adjustments and forward/back for stands on base; an emergency off button; and inverter for speed control and sanding direction.
What Comes with the Larick 230
Larick Sanders, a Pillar Machine Company | 230 Profile Sander Dust Hoods & Base
Larick Sanders, a Pillar Machine Company | Locking Casters
Larick Sanders, a Pillar Machine Company | Sanding Machine Hand Wheel
Installation Requirements
Factory installation is not necessary for this machine. It will arrive fully assembled and ready for production once necessary power and air are connected to it.
Phone support for startup is offered on this machine at no charge.
Factory on-site installations are available if preferred. Contact your Pillar Machine representative if interested in obtaining a quote for this option.
Manufactured in Salt Lake City, Utah
Larick machines are assembled, wired, programmed, tested, and supported at our Salt Lake City facility using U.S. and imported components.
The benefits of buying directly from a U.S. manufacturer include:
- Purchased components are sourced through U.S.-based suppliers.
- Strong parts availability and dependable support.
- Direct factory support from the people who know the machines best.
- When technical assistance is required, you can often speak directly with the people who assembled, wired, programmed, and tested your machine.
Options for the Larick 230
Larick Sanders, a Pillar Machine Company | 230 Profile Sander Dust Hoods
This option replaces the standard 6.5 inch Dust Hoods and Spindle shafts that come standard on the 230 with 9.5 inch Dust Hoods and Spindle shafts.
Larick Sanders, a Pillar Machine Company | 230 Profile Sander Dust Hoods
This option replaces the standard 6.5 inch Dust Hoods and Spindle shafts that come standard on the 230 with 12.5 inch Dust Hoods and Spindle shafts.
Larick Sanders, a Pillar Machine Company | 230 Profile Sander Twin 100mm Sanding Heads
This option includes:
1. Two 180mm diameter sanding head that are 100mm tall.
2. Sanding paper is Single-Sided Cora-brand Abrasive inserts and are 45mm in height.
3. Sanding paper strips are manufactured by Mastersand.
4. Sanding paper grit is 120 with flap widths 7mm.
Notes:
1. Other sanding configurations, heights, and grits are available, contact our sales rep for more information.
2. Items pictured is only representative may not represent the exact configuration of this option.
Larick Sanders, a Pillar Machine Company | 230 Profile Sander Twin 175mm Sanding Heads
This option includes:
1. Two 180mm diameter sanding head that are 175mm tall.
2. Sanding paper is Single-Sided Cora-brand Abrasive inserts and are 45mm in height.
3. Sanding paper strips are manufactured by Mastersand.
4. Sanding paper grit is 120 with flap widths 7mm.
Notes:
1. Other sanding configurations, heights, and grits are available, contact our sales engineer for more information.
2. Items pictured is only representative may not represent the exact configuration of this option.
3. To utilize this option you must select option named “230 175mm Dust Hoods” in Options section.
Larick Sanders, a Pillar Machine Company | 230 Profile Sander Twin 250mm Sanding Heads
This option includes:
1. Two 180mm diameter sanding head that are 250mm tall.
2. Sanding paper is Single-Sided Cora-brand Abrasive inserts and are 45mm in height.
3. Sanding paper strips are manufactured by Mastersand.
4. Sanding paper grit is 120 with flap widths 7mm.
Notes:
1. Other sanding configurations, heights, and grits are available, contact our sales engineer for more information.
2. Items pictured is only representative may not represent the exact configuration of this option.
3. To utilize this option you must select option named “230 250mm Dust Hoods” in Options section.
Larick, A Pillar Machine Company | 700 Series Profile Sander 208-240 Single Phase Option
208-240 volt single phase option.
Larick 460 Volt 3 Phase Option
460 volt three phase option is cost is per motor.
