220
Profile Sander
220 Advantages:
- designed for flexible brushes
- 2 upper and lower sanding heads
- table moves up and down, allowing the user to sand certain parts, easily sanding without rounding edges
The Larick Model 220 features two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.
Larick Sanders Category
More Machines Like This
Pillar Machine
Larick 360 Profile Sander
Pillar Machine
Larick Sanders, a Pillar Machine Company | 230 Profile Sander Dust Hoods & Base
Pillar Machine
Larick Sanders, a Pillar Machine Company | 150 Profile Sander
Motor:
Two each 1 HP 6 Pole, 3 Phase, Direct Drivee
Arbor:
1″ Dia. by 6″ Tall
Dust Collection:
One 4.0″ ports (300 CFM total)
Air Pressure Required:
80 PSI
208-240 Volt, 3 Phase, 50-60 Hertz
Variable Speed:
AC Inverter 100-1200 rpm
Vertical Adjustment:
6″
Table Travel:
2″
Footprint:
48″ x 41″ x 48″
(W x D x H)
Weight:
_____ lbs.
Arbor:
1″ Dia. by 6″ Tall
Table Height:
36″
Larick 220 Description
The Model 220 Profile Sander is a two-spindle machine designed for use with flexible brush type sanding wheels. The spindles are counter-rotating, allowing corners to be sanded without rounding over, and to sand in two directions. There are two height settings, allowing it to be used for both edge and panel sanding. In the raised position, the table moves toward the spindles, under the panel sanding wheel, providing support for small panels.
Standard Operation
The spindles move up or down together and are controlled by an air valve. Adjustable stops are used for positioning. In addition to the vertical spindle travel, the tabletop also moves back 2″ when the spindles are raised. This provides support under the lower sanding head when sanding raised panels.
What the 220 Does
The 220 is typically used to perform the following operation:
Sanding both sides of part
Manual On/Off Switch
Larick 220 Profile Sander uses a VFD (acronym for Variable Frequency Drive) to control electric motors in machinery. On/off VFD’s control the spindles.
What Comes with the Larick 220
Larick 220 Profile Sander Table
Larick Sanders, a Pillar Machine Company | Profile Sander Leveling Foot
Installation Requirements
Factory installation is not necessary for this machine. It will arrive fully assembled and ready for production once necessary power and air are connected to it.
Phone support for startup is offered on this machine at no charge.
Factory on-site installations are available if preferred. Contact your Pillar Machine representative if interested in obtaining a quote for this option.
Made In The USA
All Larick Machines are built 100% at our Fort Collins, Colorado Factory.
The benefits of purchasing an American made machine extend far beyond simply supporting the “local” economy.
Additional benefits include:
- All parts are sourced from vendors in North America.
- Parts availability is increased and assures honest pricing.
- Real Factory Support.
When technical assistance is required you can often talk directly to the people that built, wired, and tested your machine.
1 Year Warranty
Larick Profile Shaping & Sanding, a Pillar Machine company, warrants to the original purchaser of the Larick Machinery that this product will be free from defects in material or workmanship, when purchased, and under proper, normal use, for one (1) year from the original date of delivery. Original purchaser understands that the machine warranty is only applicable to machines that are or were paid in full within 60 days of the original delivery date.
The full defined warranty can be found here: https://pillarmachine.com/pillar-service/#warranty
Options for the Larick 220
Larick Sanders, a Pillar Machine Company | Locking Casters
Locking casters for easy mobility and locking machine in place.
110 volt, single phase option.
Larick 220 Profile Sander | Optional Sanding Heads
1. Two each stacks of sanding hubs. Each hub contains:
a. Top Angled Sanding hub and abrasives for sanding door edges, 24 strips per head.
b. Straight Sanding hub and abrasives for sanding door edges overlapped with angled top hub. 24 strips per head.
c. Cup Type Sanding hub and abrasives for sanding raised panels. 36 strips per head.
2. These hubs are manufactured by Larick Machinery.
3. Sanding paper inserts are all 45mm in height.
4. Sanding paper grit on the edge profile sanders is 120.
5. Sanding paper grit on the panel profile sanders is 120 on one head and 150 on the other head.
6. Sanding paper inserts are manufactured by Mastersand.
Notes:
1. Other sanding configurations, heights, and grits are available, see asales manager for more information.
2. Pricing subject to change.
Larick, A Pillar Machine Company | 700 Series Profile Sander 208-240 Single Phase Option
208-240 volt single phase option.
Larick 460 Volt 3 Phase Option
460 volt three phase option is cost is per motor.
Larick 575 Volt 3 Phase Option
575 volt three phase option is cost is per motor.
